Solamat 500
Dry or wet sole cleaning
Weight: 107kg net, 123kg gross
Start/Stop automatism:
via optical sensor
Power supply:
230 volt (110 volt optionally)
Motor:
0,18kW, 50Hz, Iso-Cl F, IP 55
Specifics:
½" water supply with solenoid valve.
Pressure can be regulated
from 0 – 1,6bar. Hose pump with
0,15 – 4,5l / hour water
throughput. Drain cock with 1" exit.
Start/Stop automatism:
via optical sensor
Power supply:
230 volt (110 volt optionally)
Motor:
0,18kW, 50Hz, Iso-Cl F, IP 55
Specifics:
½" water supply with solenoid valve.
Pressure can be regulated
from 0 – 1,6bar. Hose pump with
0,15 – 4,5l / hour water
throughput. Drain cock with 1" exit.
Drive: belt drive and strong motor
RPM of the brushes:
via frequency inverter
continuously variable
Dimension inclusive drip-off grate:
70cm x 150cm x 18,5/128cm
width x depth x height
Dimension of brush area:
40cm x 50cm x 1cm
width x depth x height
Brushes:
nylon fiber: 0,20mm,
black, smoothly waved
RPM of the brushes:
via frequency inverter
continuously variable
Dimension inclusive drip-off grate:
70cm x 150cm x 18,5/128cm
width x depth x height
Dimension of brush area:
40cm x 50cm x 1cm
width x depth x height
Brushes:
nylon fiber: 0,20mm,
black, smoothly waved
These high quality industry devices are made entirely from stainless steel. They should be used as a forced pathway which all users have to pass. Before entering the actual cleaning area the user will be recognised by an optical sensor located in the hand rail. This sensor automatically starts the counter-rotating wheel brushes and switches the machine off when the user has left the device.
Solamat 500 is a wet cleaning unit and requires a ½" connection for water input. When the machine starts, a solenoid valve opens and feeds water to the bin and brushes. A separate hose pump can add cleaning fluids or disinfectants while a regulator is responsible for a constant level. The wheel brushes take up water plus optional cleaning media and transport both towards the soles to be cleaned. Effluent water is drained away from the machine’s bin and should be fed into drainage. A drip-off grate behind the brushing area minimizes further water transportation. With a 1" drain cock dirty water can be let off.
Solamat 500 is a wet cleaning unit and requires a ½" connection for water input. When the machine starts, a solenoid valve opens and feeds water to the bin and brushes. A separate hose pump can add cleaning fluids or disinfectants while a regulator is responsible for a constant level. The wheel brushes take up water plus optional cleaning media and transport both towards the soles to be cleaned. Effluent water is drained away from the machine’s bin and should be fed into drainage. A drip-off grate behind the brushing area minimizes further water transportation. With a 1" drain cock dirty water can be let off.
Solamat 500
Active cleaning area
